Preparation Instructions for Armstead Floor Paint

Surface Inspection:

Ensure the surface is structurally sound, free from damage, and dry. Repair any cracks, holes, or imperfections before starting the painting process.

Surface Cleaning:

Thoroughly clean the surface to remove any dirt, dust, oil, grease, or other contaminants. This ensures proper adhesion and a uniform finish.

Degreasing:

For areas exposed to oils or heavy contamination, degrease the surface using an appropriate cleaner and allow it to dry completely. Rinse the surface with clean water if necessary and ensure no cleaning residues are left behind.

Moisture Check:

Ensure that all surfaces are completely dry before painting. Moisture or dampness may hinder the adhesion and overall performance of the coating. For best results, use a moisture meter to ensure the surface has a moisture content of less than 18%.

Temperature Conditions:

Apply the paint when the surface and air temperature are between 10°C and 25°C. Avoid application in conditions where humidity exceeds 85%.

Masking and Protection:

Mask off adjacent areas that do not require painting, such as trim, fittings, or adjacent surfaces, to ensure clean and precise edges. Use protective sheets or covers to shield nearby objects from paint splashes.

Mixing the Paint:

Stir the Floor Paint thoroughly with a stick or paddle before use. Continue stirring at intervals during application to maintain an even distribution of the finish.

By following these preparation steps, you will ensure a durable finish, ideal for areas exposed to heavy traffic. For optimal performance, always refer to the product’s technical data sheet and manufacturer’s guidelines.

Application Guidance for Armstead Floor Paint

Initial Coat Application:

Using a quality brush, roller, or spray equipment, apply the first coat of Armstead Floor Paint evenly across the prepared surface.

Coverage:

Apply the paint at the recommended coverage rate, which is typically around 16 square meters per litre, depending on the porosity and texture of the surface. Avoid over-applying the paint, as it may affect drying times and finish quality.

Edge and Detail Work:

Use a small brush to carefully cut in around edges, corners, and areas near walls or fixed structures.

Drying Time Between Coats:

Allow the first coat to dry for at least 16-24 hours before applying a second coat. The paint is touch-dry within 4-6 hours, depending on temperature and humidity. Avoid knocks and scrapes on the freshly painted surface during this drying time to prevent damage to the finish.

Second Coat Application:

Apply a second coat of Floor Paint to ensure maximum durability. Stir the paint thoroughly before application.

Follow the same application method as the first coat, taking care to cover any missed areas and ensure a uniform finish.

Post-Application Care:

Allow the painted surface to dry for a minimum of 24 hours before handling and using the painted surface. For areas subject to heavy machinery or equipment, wait at least 36 hours before use to ensure full curing. Avoid exposing the painted surface to water or heavy moisture for at least 36 hours after application to prevent discolouration or poor adhesion.

Tools and Equipment:

After completing the application, clean all brushes and equipment with white spirit. Ensure that tools are thoroughly cleaned immediately after use to prevent the paint from hardening.

Temperature and Weather Conditions:

Do not apply the paint if the temperature is below 10°C or above 25°C during application and drying times.

By following this application guidance, you’ll achieve a professional finish that is both durable and effective in high-traffic areas. For additional details on the product and its specific uses, consult the technical data sheet provided by Armstead.

Aftercare for Armstead Floor Paint

Initial Curing Period:

Allow the painted surface to fully cure before subjecting it to heavy use. While the paint is dry to the touch in 4-6 hours, full curing may take up to 36 hours depending on conditions such as humidity and temperature.

Avoid dragging heavy objects or machinery across the surface during this curing period to prevent damage to the finish.

Regular Cleaning:

Clean the painted surface regularly to maintain its appearance. Use a soft-bristle brush or sponge along with a mild detergent solution. Avoid harsh chemicals or abrasive cleaning tools, as these can damage the paint and reduce its effectiveness.

For large areas, power washing at low pressure can be used for cleaning. Ensure that no high-pressure jets are used directly on the surface to avoid wearing away the paint.

Preventing Damage:

Heavy impacts or dragging sharp or heavy objects across the painted surface may damage the coating. Use protective mats or padding where needed to minimize wear in high-use areas, especially where equipment is moved frequently.

Keep the surface free of debris such as dirt, gravel, or sand that could cause abrasion and premature wear of the coating.

Reapplication and Maintenance:

Over time, particularly in areas exposed to high traffic or machinery, the coating may reduce due to wear. Inspect the surface regularly and touch up any areas that show signs of wear or damage.

Reapply a fresh coat of Armstead Floor Paint to restore and refresh the appearance. Ensure that the surface is clean and dry before any reapplication.

Long-Term Protection:

If used in an area exposed to oil or chemicals, promptly clean spills to prevent staining or weakening of the paint’s adhesion.

If used in an area exposed to oil or chemicals, promptly clean spills to prevent staining or weakening of the paint’s adhesion.

By following these aftercare steps, you will maintain the longevity, appearance, and effectiveness of Armstead Floor Paint, ensuring it continues to provide safe and durable protection on a variety of surfaces.